USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)". Please, sit back and study the below research material carefully. This project topic "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" visible for everyone, then the complete material on "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" is to be ordered for. Happy viewing!!!

---

1.0                                                        INTRODUCTION
1.1                                           BACKGROUND OF THE STUDY
A programmable logic computer (PLC) is an industrial digital computer that is generally used to control the process. As it is an industrial computer, a logical program to control the process is prepared in the general computer.
Then this program is transferred to the PLC using cables. This program is stored in the PLC memory.
The logical program is prepared using a programming language called Ladder logic, Statement List, or Functional block diagram. A program is prepared in such a way that the peoples with electrical or instrumentation background can easily understand.
A Programmable Logic Controller consists of various inputs and outputs modules. A PLC monitors the status of switches and sensors using input terminals and based on this status they will give the command to the output devices through the output terminals.
PLCs were first developed in the automobile manufacturing industry to provide flexible, rugged and easily programmable controllers to replace hard-wired relay logic systems. Since then, they have been widely adopted as high-reliability automation controllers suitable for harsh environments.
Since PLC (Programmable Logic Controller) was firstly introduced in 1970 , it has been widely applied to various industrial uses such as machine and process controls. Designed with the latest microprocessor and electronic circuitry, today's compact-size PLCs feature high level of reliability, performance, speed and networking. The use of PLCs in automated production lines improves system reliability, product quality, information sharing, efficiency and flexibility and thus reduces costs. PLC-310 is a self-contained trainer which consists of a MITSUBISHI PLC main unit, I/O devices for simulation and I/O devices that are commonly used. It provides students with a thorough understanding of the theories and applications of programmable logic controllers. This trainer enables students to learn step by step the fundamentals of PLC and more advanced controls used in industry. This work is aimed at building a Mitsubishi compact fx2n 32mr PLC trainer kit.

1.2                                                    PROJECT MOTIVATION
It is of great importance in lab of any institution to offer students a high level education regarding digital electronics. It is a great essence in technology learning platform. Circuit board can be touched and the component. With trainer kit students will be able to learn step by step the fundamentals of PLC and more advanced controls used in industry

 1.3                                           PROJECT AIM AND OBJECTIVES
The main aim of this work is to setup a Mitsubishi compact fx2n 32mr PLC trainer kit (for batch control of a level tank). The objectives are:

• To practically realize the PLC digital circuits.
• To build a hardware prototype of the PLC trainer kit for educational experimental
• To provide knowledge about components and also verify the theoretical knowledge of PLC circuits. 

1.4                                          SIGNIFICANCE OF THE STUDY
By the advent this system, the Understanding level of PLC  Digital Electronicsu will increase rapidly and clearly.
This study will provide students with a thorough understanding of the theories and applications of programmable logic controllers.
This trainer enables students to learn step by step the fundamentals of PLC and more advanced controls used in industry. 

1.5                                                        FEASIBILITY STUDY
The hardware and software used in the proposed system easily fulfills the need of the proposedu system. The devices used in this system are easily available and very simple to use.
Technical: The devices used in this system are easily available and require interfacing with standard components.  Devices are technically feasible for the proposed system.
Economical: Economic in price and are easily available. It is very beneficial as it provides best result at low price. This device can be used in collages, in advance research and even at home. Maintenance of the device is very cheap.
Schedule:  The deadline for the completion of this project is very desirable and this project will be completedu within 2 to 3 weeks.

1.6                                            APPLICATION OF THE STUDY
Mitsubishi Compact Fx2n 32mr PLC Trainer can be used in collages, in advance research, industries and even at home.

1.7                                                    SCOPE OF THE PROJECT
The scope of this work covers the building of a Mitsubishi Compact Fx2n 32mr PLC Trainer which is a self-contained set of electronic and power circuits that can be interlinked by students to create working circuits. The trainer has 16 digital input and output with Ladder Logic as the programming language used. The system has DIN rail mounting type, input voltage of 240Vac and computer programming interface.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" is also available. Order full work to download. Chapter two of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" consists of the literature review. In this chapter all the related work on "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" is available. Order full work to download. Chapter three of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" is available. Order full work to download. Chapter four of"design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" is available. Order full work to download. Chapter five of"design and construction of mitsubishi compact fx2n 32mr plc trainer (for batch control of a level tank)" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: