USER'S INSTRUCTIONS: The project work you are about to view is on "design, construction and installation of electric outdoor solar powered analogue wall clock". Please, sit back and study the below research material carefully. This project topic "design, construction and installation of electric outdoor solar powered analogue wall clock" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design, construction and installation of electric outdoor solar powered analogue wall clock" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design, construction and installation of electric outdoor solar powered analogue wall clock" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design, construction and installation of electric outdoor solar powered analogue wall clock" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design, construction and installation of electric outdoor solar powered analogue wall clock" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design, construction and installation of electric outdoor solar powered analogue wall clock" visible for everyone, then the complete material on "design, construction and installation of electric outdoor solar powered analogue wall clock" is to be ordered for. Happy viewing!!!

---

This work is on building a solar powered outdoor analogue clock that is place outside the house for the public. This device was built with few electronics components, solar panel and analogue wall clock. In this work, a 6v solar panel and super capacitor was used to achieve the renewable power system. The super capacitor keeps the clock running through dull periods in the winter when solar energy is in short supply and then catch up on a bright day.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• PURPOSE OF THE PROJECT
• AIM/OBJECTIVE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• APPLICATION OF THE PROJECT
• SCOPE OF THE PROJECT
• LIMITATION AND SCOPE OF THE PROJECT

CHAPTER TWO
LITERATURE REVIEW

• OVERVIEW OF CLOCK
• HISTORY OF TIME-MEASURING DEVICES
• INDICATOR IN CLOCKS
• YPES OF CLOCK
• DESCRIPTION OF COMPONENTS USED

CHAPTER THREE
METHODOLOGY

• INTRODUCTION
• SYSTEM BLOCK DIAGRAM
• MATERIALS USED
• SYSTEM CIRCUIT DIAGRAM
• CIRCUIT DESCRIPTION

CHAPTER FOUR

• .0     TEST AND RESULT
• DESIGN PROCESS
• CASING AND PACKAGING
• INSTALLATION OF THE COMPLETED DESIGN
• TESTING THE CLOCK
• RESULT

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

 

 

 

 

CHAPTER ONE

• INTRODUCTION

1.1                                         BACKGROUND OF THE PROJECT
A clock has been known as a device used to measure and indicate time. The clock is one of the oldest human inventions, meeting the need to measure intervals of time shorter than the natural units: the day, the lunar month, year and galactic year. Devices operating on several physical processes have been used over the millennia.
Clocks have different ways of displaying the time. Analog clocks indicate time with a traditional clock face, with moving hands. Digital clocks display a numeric representation of time. Two numbering systems are in use: 24-hour time notation and 12-hour notation (Macey et al., 2019)
Analog clocks usually use a clock face which indicates time using rotating pointers called "hands" on a fixed numbered dial or dials. The standard clock face, known universally throughout the world, has a short "hour hand" which indicates the hour on a circular dial of 12 hours, making two revolutions per day, and a longer "minute hand" which indicates the minutes in the current hour on the same dial, which is also divided into 60 minutes. It may also have a "second hand" which indicates the seconds in the current minute (Macey et al., 2019).
Over many decade, it has been discovered that the major problem of the analogue clock is power consumption due to moving parts that it operates with.
The study was carried out to interface analogue clock with electric outdoor wall clock.

1.2                                                  PROBLEM STATEMENT
Analogue clock consumes much power due to the moving parts of the system and it usually power with lithium battery. As a result of high battery consumption analogue clock battery dies quicker and a result of that it stops working as soon as the battery dies. This has been a serious challenge faced when using analogue clock. However, this study was carried out to overcome this problem by interfacing analogue wall clock with renewable energy.

1.3                                   AIM AND OBJECTIVE OF THE PROJECT
The main aim of this study is to interface electric outdoor wall clock with solar energy. The objectives of this project are:

• To have an analogue wall clock with uninterruptible power supply
• To help the public to monitor and manage their schedules
• To save cost of buying batteries and reduce the labour involve in replacing the battery.

1.4                                         SIGNIFICANCE OF THE PROJECT
Working on this topic will help the student involved to understand how analogue wall clock works. It will also help the reader to understand the importance of having an outdoor wall clock
This study will serve as a means of exposing us to the application, uses and installation of a solar energy.

 1.5                             ADVANTAGES OF THE PROJECT

• It is simple and durable.
• It will serve as a means of increasing users preference.
  

1.6                                             APPLICATIONS
Electric outdoor solar powered analogue wall clocks are found in places like:
• schools
• churches
• roundabouts etc.

1.7                                                     SCOPE OF PROJECT

The scope of this work covers interfacing an analogue clock with solar energy. The device was built around installing a 6v solar panel and a super capacitor which stores energy that power an analogue wall clock.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design, construction and installation of electric outdoor solar powered analogue wall clock" is also available. Order full work to download. Chapter two of "design, construction and installation of electric outdoor solar powered analogue wall clock" consists of the literature review. In this chapter all the related work on "design, construction and installation of electric outdoor solar powered analogue wall clock" was reviewed.

CHAPTER THREE: The complete chapter three of "design, construction and installation of electric outdoor solar powered analogue wall clock" is available. Order full work to download. Chapter three of "design, construction and installation of electric outdoor solar powered analogue wall clock" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design, construction and installation of electric outdoor solar powered analogue wall clock" is available. Order full work to download. Chapter four of "design, construction and installation of electric outdoor solar powered analogue wall clock"consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design, construction and installation of electric outdoor solar powered analogue wall clock" is available. Order full work to download. Chapter five of "design, construction and installation of electric outdoor solar powered analogue wall clock" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: